General notice
Product is delivered unassembled and unpainted. Deburring, grinding, bending, filling and other work may be necessary to ensure parts fit properly. Some detials might by slightly different than shown on the pictures.
Mortian Buggy Big Gunner Platform with tracks
Rated 4.00 out of 5 based on 1 customer rating
(1 customer review)
22,50 € incl. 19% VAT (EU), excl. VAT (non EU)
In stock (can be backordered)
SKU: 826
Category: Big Buggy line
Description
This kit includes the gunnerplatform, the rear tracks, a turret and the following weapon options:
- twin Lasercannon
- twin Gatlinglaser
To build a complete model you also need the following kits:
- 1x Driver/Gunner (the seat shown in the pictures is part of the Driver/Gunner model)
- 1x Buggy Big Mainbody
Complete buggy dimensions are:
- length: 120mm,
- width: 50mm,
- height(roof): 40mm,
- height (top of weapon): 50mm
Resin safety instructions
Resin dust is harmful when inhaled. Dusts may cause temporary mechanical irritation to the eyes, skin, and respiratory tract. Accidental ingestion may cause illness or irritation to the mouth and gastrointestinal tract.
Avoid generating dust; fine dust dispersed in air in sufficient concentrations and in the presence of an ignition source is a potential dust explosion hazed. On combustion, may emit toxic fumes of carbon monoxide (CO).
Risk of inhalation can be mitigated by taking certain precautions. When sanding polyurethane resin, use wet sandpaper to reduce the amount of airborne dust, and always wear a filter mask and safety goggles. Gloves and a long-sleeved shirt are also a good idea to reduce skin exposure. The room in which you are working should be well-ventilated. If you begin experiencing any adverse reactions while sanding polyurethane resin, you should contact a physician immediately.
Reviews (1)
1 review for Mortian Buggy Big Gunner Platform with tracks
Add a review Cancel reply
You must be logged in to post a review.
filip.schroeter (verified owner) –
As with the small buggy a really nicely detailed model witout warping or airbubbles. Unfortunatly I encountered the same problem with the driver/gunner as with the small buggy: they just don’t fit in the driver position. There is no room for the feet/the “leg part” of the empty printable seat, so one either has to cut away part of the driver or drill away some foot space. The left-driver position additionally has an angle on the left that is uncompatible with the drivers left leg, wich also has to be shortened/cut. The drivers also sit to high and have their heads stick out of the roll cage unless one removes the seat.
I know that the vehicle itself should not be blamed for the pilot, but one should be aware that the driver – at least in the version I bought – is not as compatible as one might think.