This set contains several pieces that fit to the plastic Zone Mortalis kit from Games Workshop.
The pieces are 3d printed and are still attached to the support structure.
The following parts are included:
- 1x tilted tile 1 (wall and pillar tiles)
- 1x tilted tile 2 (two open floor tiles)
- 1x box (must be connected to the tilted floor tile 2)
Product is delivered unassembled and unpainted. Deburring, grinding, bending, filling and other work may be necessary to ensure parts fit properly.
The models are for expirienced modellers only. We do not recommend them for children under 15 years of age. Always be careful and protect yourself. Dont cut towards your fingers and cover your eyes and hair when working with electric machines like rotary grinders.
Some detials might by slightly different than shown on the pictures.
Use a respirator when grinding, sanding or sawing resin. Do not swallow or chew any resin parts.
Resin dust is harmful when inhaled. Dusts may cause temporary mechanical irritation to the eyes, skin, and respiratory tract. Accidental ingestion may cause illness or irritation to the mouth and gastrointestinal tract.
Avoid generating dust; fine dust dispersed in air in sufficient concentrations and in the presence of an ignition source is a potential dust explosion hazed. On combustion, may emit toxic fumes of carbon monoxide (CO).
Risk of inhalation can be mitigated by taking certain precautions. When sanding polyurethane resin, use wet sandpaper to reduce the amount of airborne dust, and always wear a filter mask and safety goggles. Gloves and a long-sleeved shirt are also a good idea to reduce skin exposure. The room in which you are working should be well-ventilated. If you begin experiencing any adverse reactions while sanding polyurethane resin, you should contact a physician immediately.
There are no reviews yet.